1
/
5
- Γλώσσα:
Σύνδεσμος αγγελίας:
car.gr/41433111
TTE300 4645 MINI COOPER R56 UPGRADE TURBOCHARGER
2.080 €
Χαρακτηριστικά
Τίτλος
TTE300 4645 MINI COOPER R56 UPGRADE TURBOCHARGER
Κατάσταση
Καινούργιο (Ιμιτασιόν)
Τιμή
2.080 €
Κατηγορία
Ανταλλακτικά Αυτοκινήτων - Turbo / Τουρμπίνες
Κωδικός aftermarket
TTE300
Κατασκευαστής ανταλακτικού
The Turbo Engineers - TTE300 
TTE300 4645 MINI COOPER R56 UPGRADE TURBOCHARGER
2.080 €
TTE300 start life from a brand new Genuine BorgWarner twin scroll turbocharger, we then dismantle and set about upgrading as Turbo Engineers.
To produce a TTE300 upgrade turbocharger we use a much larger TTE billet compressor wheel, chosen because it is highly efficient and light in weight for fast response. This compressor also features Extended tip technology giving a compressor map that's very wide, creating an extremely high flow for comparative size. We CNC Re-Profile the compressor cover in-house to an optimized tight tolerance and finish to ensure maximum compressor efficiency is given.
The intake to the compressor wheel is CNC milled/ported to smooth the transition from the intake pipework to the larger compressor to lower turbulence and maximize velocity and improve flow. We CNC re-profile the exhaust turbine housing to optimized profile and gap to take a larger 9Blade turbine and shaft that we use on this stage, this turbine offers higher flow and less back pressure.
Special profile 360 deg high-performance BorgWarner motorsport journal bearing is fitted, to remain durable at higher loads with no loss in transient response. The actuator used is a sprung Genuine BorgWarner unit.
Equilibrium
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with serial numbered balance test result document.
Product Highlights:
Original BWTS turbocharger as base part
TTE Billet Milled compressor 6+6 BLADE 46mm inlet
9Blade High-Flow Turbine 45mm outlet
BWTS Motorsport bearing pack
300PS+ Proven 98Ron Fuel
Plug and Play installation (larger intake recommended & ported OE exhaust manifold collector)
Proven TheTurboEngineers quality
Single parts finely balanced then components assembled and core high-speed VSR balanced
Software recalibration is required
Supplied with a balance test result document
1 YEAR TTE TROUBLE-FREE WARRANTY
Made in Germany
TTE HEAT SHIELD ISOLATION ADD-ON extra cost option that’s available for the turbine housing.
Key Features
Non-woven silicate fiber surrounded by welded foil
Stainless steel rigid insulation foil
High mechanical and vibration resistance, lightweight
Excellent fluid splash and spill resistance
Excellent corrosion resistance
Resilient at continuous temperatures up to 1300°C
Reduced dimensions compared to turbo blankets
Reduced engine bay temps
Performance improvements
Adjacent component protection
Up to 600°C lower temps at Isolation surface
2.080 €
Αρ. αγγελίας:
Χαρακτηριστικά
Τίτλος
TTE300 4645 MINI COOPER R56 UPGRADE TURBOCHARGER
Τιμή
2.080 €
Ιμιτασιόν
Κατάσταση
Καινούργιο (Ιμιτασιόν)
Κωδικός aftermarket
TTE300
Κατασκευαστής ανταλακτικού
The Turbo Engineers - TTE300
Τελευταία αλλαγή
23 ώρες πριν
Σύνδεσμος
Online Χρηματοδότηση
Περιγραφή
TTE300 start life from a brand new Genuine BorgWarner twin scroll turbocharger, we then dismantle and set about upgrading as Turbo Engineers.
To produce a TTE300 upgrade turbocharger we use a much larger TTE billet compressor wheel, chosen because it is highly efficient and light in weight for fast response. This compressor also features Extended tip technology giving a compressor map that's very wide, creating an extremely high flow for comparative size. We CNC Re-Profile the compressor cover in-house to an optimized tight tolerance and finish to ensure maximum compressor efficiency is given.
The intake to the compressor wheel is CNC milled/ported to smooth the transition from the intake pipework to the larger compressor to lower turbulence and maximize velocity and improve flow. We CNC re-profile the exhaust turbine housing to optimized profile and gap to take a larger 9Blade turbine and shaft that we use on this stage, this turbine offers higher flow and less back pressure.
Special profile 360 deg high-performance BorgWarner motorsport journal bearing is fitted, to remain durable at higher loads with no loss in transient response. The actuator used is a sprung Genuine BorgWarner unit.
Equilibrium
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with serial numbered balance test result document.
Product Highlights:
Original BWTS turbocharger as base part
TTE Billet Milled compressor 6+6 BLADE 46mm inlet
9Blade High-Flow Turbine 45mm outlet
BWTS Motorsport bearing pack
300PS+ Proven 98Ron Fuel
Plug and Play installation (larger intake recommended & ported OE exhaust manifold collector)
Proven TheTurboEngineers quality
Single parts finely balanced then components assembled and core high-speed VSR balanced
Software recalibration is required
Supplied with a balance test result document
1 YEAR TTE TROUBLE-FREE WARRANTY
Made in Germany
TTE HEAT SHIELD ISOLATION ADD-ON extra cost option that’s available for the turbine housing.
Key Features
Non-woven silicate fiber surrounded by welded foil
Stainless steel rigid insulation foil
High mechanical and vibration resistance, lightweight
Excellent fluid splash and spill resistance
Excellent corrosion resistance
Resilient at continuous temperatures up to 1300°C
Reduced dimensions compared to turbo blankets
Reduced engine bay temps
Performance improvements
Adjacent component protection
Up to 600°C lower temps at Isolation surface
Έμπορος
Έμπορος στο car.gr από 06-12-2023